TECHNICAL SPECIFICATIONS

Types SQUARE / DOMED
Max LED Width 10mm
Max LED Height 3mm

Max LED Length 10M
Construction Silicone
UV UV Stable
Environment IP67
Operating Temp Range -20 to 50°C

ADD TO PROJECT

Product Code *
Email *
Name *
Quantity *
Company
Project Reference
Submit

DOMED NEON FLEX

CV LED FLEXIBLE NEON

Our neon flex housings are designed to house up to 10mm wide flexible LED tapes and are available to buy with a draw string to make up your own bespoke lengths of neon LED.

To learn more about how to DIY your own lengths of neon flex, we have some simple steps below...
STEP 1.
Cut your compatible LED to desired length before cutting your neon flex housing 5mm wider each end, using your LED as a guide. 
(WARNING: Take care not to cut through or lose your draw string)
(TIP: You may wish to allow extra room for your cuts for a longer draw string each end.)

STEP 2.
Tie draw string to LED input cable, looping between two twisted cores and tinning with solder, making sure you have a strong knot before pulling LED through.​​​
STEP 3.
Use the draw string to pull the LED through keeping both the neon flex housing and the LED straight and taut.
STEP 4.
Once you have pulled your LED through, discard of the draw string before sealing the ends using the end caps provided and adhering with sufficient silicone.​